THE SLATESLICE slate guillotine

THE MEAN,GREEN CUTTING MACHINE

 

 

  • With its 650mm blade it will slice through a full slate cleanly and accurately in one stroke rather than chopping or nibbling which takes longer and is harder to keep a straight edge
  • Blade should never need replacing in normal use but if damaged can be replaced quite easily as it is held in slot by 3 bolts and not permanently welded to arm as with some other cutters
  • Cuts to 12mm thick and not limited to 7mm as with hand held cutters and small slate choppers
  • Gives neat feathered edge to slate
  • Fitted with pin for holeing
  • Ideal for trimming used slates to smaller size quickly and accurately
  • Side location for angled cutting for valleys and hips and repeat cutting to same size for "under office" ( 1st row ) or row next to ridge.
  • Can be used on the roof,on a bench or freestanding on the floor
  • BE WARY of copies of our cutters which look the same which are not made to our high standards,if in doubt give us a call  07927105417 or 01803873765
  • NOTE  this cutter is not suitable for Brazilian slate
 £ 155.00 plus carriage (see shipping)
 

 

 

 

  •  

  •  

     

     

     

      

    •                                                                    

     

    Make a Free Website with Yola.